Support and Contact Center

Purpose of File:

This Firmware (Ver.1.02) update will revise the internal software of the FinePix F10 digital camera. Installation of this update is optional. It incorporates the following enhancements:
1) Correction of English displayed on the LCD monitor
2) Updates the compatibility of the PictBridge function with some printers
3) Correction of an error that would not allow some computers to start up if the camera was connected and turned on.

Products Supported:

FinePix F10

System Requirements:

Mac OS

Instructions:

Click on "Download Now" to open the Fujifilm Worldwide site with complete download and installation instructions.

Precautions
1) Before performing this upgrade, please set the background color on your camera to blue. See pages 79-81 of your owner's manual for instructions.

2) If firmware upgrading fails, the camera may not operate correctly in some cases. Carefully read the notes provided here. Please note that this procedure is not covered under any Fujifilm warranty.

3) Always use the AC adapter when upgrading the firmware. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.

4) Firmware upgrading takes approximately 2 minutes.

5) Once the firmware has been upgraded, the previous version cannot be restored.

6) The xD-Picture Card must be formatted before beginning this process. Since formatting the card will erase all data and images, please be sure to download all images to your computer before formatting.

Search Support & Contact Center